System camera HDC-5500V

Tổng quan

Expand your creative horizons to new resolutions with HDC-5500V’s pre-installed variable ND filter for smooth handling and precise shooting and simultaneous HDR and SDR production. HDC-5500V is a 2/3-inch 4K 3-CMOS sensor portable system camera with direct 4K output and digital triax or wireless operation with a choice of optional outside panels for added versatility.

• Pre-installed variable ND filter
• Pre-installed VF slide mechanism
• 4K 4x HFR capability
• Simplified brightness control with Virtual IRIS
• Unified INTERCOM panel
• Simple solution for IP remote production
• Recording and real time network transfer
• Networked TRUNK feature

Thông số kỹ thuật

Thông tin chung

• Power requirements: AC 240 V, 1.4 A (max.), DC 12 V, 9.5 A (max.), DC 240 V, 1.05 A (max.)
• Operating temperature: -20°C to +45°C (-4°F to 113°F)
• Storage temperature: -20°C to +60°C (-4°F to +140°F)
• Mass: Approx. 5.1 kg (11 lb 3.9oz) (unit only)
• Dimensions (W x H x D) [Hood is not included.]: 138 x 268 x 363

Cảm biến

• Imager: 2/3 inch type 4K CMOS sensor with global shutter
• Method: 3-CMOS, RGB
• Effective resolution (H x V): QFHD: 3840 × 2160; HD: 1920 × 1080

Electrical characteristics

• Sensitivity: F10 with 1080/59.94p; F11 with 1080/50p (at 2,000 lx with 89.9% reflectance)
• Signal-to-noise ratio: -62 dB
• Geometric distortion: Negligible (not including lens distortion)

Thông số kỹ thuật hệ thống quang

• Spectrum system: F1.4 prism
• Built-in filters: ND filters 1: CLEAR, 2-5:; Variable ND　(1/3-1/256)

Kết nối vào/ ra

• CCU: Optical/electrical multi connector (LEMO 3K.93C connector) (x1)
• LENS: 12-pin (x1)
• VF: 20-pin (x1)
• MIC 1 IN: XLR 3-pin, female (x1)
• AUDIO IN CH1, CH2: XLR 3-pin, female (x1 each); When AUDIO switch is set to MIC: –60 dBu (can be selected up to –20 dBu by menu operation), balanced; When AUDIO switch is set to LINE: 0 dBu, balanced
• INTERCOM 1, INTERCOM 2: XLR 5-pin, female (x1 each)
• EARPHONE: 4-pole mini jack (x1), (3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
• DC IN: XLR 4-pin (x1), DC 10.5 to 17 V
• DC OUT: 4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹; 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
• SDI 1: BNC (x1)
• SDI 2: BNC (x1)
• SDI MONI: BNC (x1)
• TEST OUT: BNC (x1)
• PROMPTER/GENLOCK: BNC (x1); PROMPTER 1 Vp-p, 75 Ω; GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω,; SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
• PROMPTER2: No
• RET CTRL: 6-pin (x1)
• REMOTE: 8-pin (x1)
• TRACKER: 12-pin (x1)
• CRANE: 12-pin (x1)
• USB: USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
• NETWORK TRUNK: RJ-45 type 8-pin (x1)

Phụ kiện đi kèm

• Before Using This Unit (1),
• Operating Instructions (CD-ROM) (1),
• Cable clamp belt (1 set),
• Screws (+B3×8) (2),
• Attached label (1)