HDC-3500V 2/3-inch 3-CMOS System Camera
Tổng quan
Expand your creative horizons to new resolutions with HDC-3500V’s pre-installed variable ND filter for smooth handling and precise shooting and simultaneous HDR and SDR production. HDC-3500V features 2/3-inch 4K 3-CMOS sensor with Global Shutter technology that eliminates the ‘jello effect’ and banding noise.
- Pre-installed variable ND filter
- Pre-installed VF slide mechanism
- HD 4x capability
- Simplified brightness control with Virtual IRIS
- Unified INTERCOM panel
- imple solution for IP remote production
- Recording and real time network transfer
- Networked TRUNK feature
Thông số kỹ thuật
General
- Power requirements: AC 240 V, 1.4 A (max.), DC 240 V, 1.05 A (max.)
- Operating temperature: -20°C to +45°C (-4°F to 113°F)
- Storage temperature: -20°C to +60°C (-4°F to +140°F)
- Mass: Approx. 5.0 kg (11 lb 0.4 oz) (unit only)
- Dimensions (W x H x D) [Hood is not included.]: 138 x 268 x 363
Imager
- Imager: 2/3 inch type 4K CMOS sensor with global shutter
- Method: 3-CMOS, RGB
Electrical characteristics
- Sensitivity: F10 with 1080/59.94p; F11 with 1080/50p (at 2,000 lx with 89.9% reflectance)
- Signal-to-noise ratio: -62 dB
- Geometric distortion: Negligible (not including lens distortion)
Optical system specifications
- Spectrum system: F1.4 prism
- Built-in filters: ND filters 1: CLEAR, 2-5; Variable ND (1/3-1/256)
Input/output connectors
- CCU: Electro-optical connector (LEMO 3K.93C connector) (x1)
- LENS: 12-pin (x1)
- VF: 20-pin (x1)
- MIC 1 IN: XLR 3-pin, female (x1)
- AUDIO IN CH1, CH2: XLR 3-pin, female (x1 each); AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced; AUDIO switch for LINE: 0 dBu, balanced
- INTERCOM 1, INTERCOM 2: XLR 5-pin, female (x1 each)
- EARPHONE: 4-pole mini jack (x1), (2-pole mono, 3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
- DC IN: XLR 4-pin (x1), DC 10.5 to 17 V
- DC OUT: 4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹; 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
- SDI 1: BNC (x1)
- SDI 2: BNC (x1)
- SDI MONI: BNC (x1)
- TEST OUT: BNC (x1)
- PROMPTER/GENLOCK: BNC (x1); PROMPTER 1 Vp-p, 75 Ω; GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω,; SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
- PROMPTER2: BNC (x1), 1 Vp-p, 75 Ω
- RET CTRL: 6-pin (x1)
- REMOTE: 8-pin (x1)
- TRACKER: 12-pin (x1)
- CRANE: 12-pin (x1)
- USB: USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
- NETWORK TRUNK: RJ-45 type 8-pin (x1)
Supplied accessories
- Before Using This Unit (1),
- Operating Instructions (CD-ROM) (1),
- Cable clamp belt (1 set),
- Screws (+B3×8) (2),
- Attached label (1)
Reviews
There are no reviews yet.