Tổng quan
3.5″ Colour LCD HD Viewfinder for cameras with a rectangle-type 26-pin viewfinder interface. The applicable cameras output the higher resolution QHD signal to this viewfinder.
Camera operators can see the LCD, directly, because the optical loupe and the elbow parts can be flipped-up.
Camera operators can see the LCD, directly, because the optical loupe and the elbow parts can be flipped-up.
3.5″ Colour LCD QHD Viewfinder
Uses 26-pin viewfinder interface
Thông số kỹ thuật
| General | |
| Power supply | 10.5 to 17.0 V DC (supplied by the camera) |
| Power consumption | 2.0 W |
| Operating temperature | C to 40C (32F to 104F) |
| Storage temperature | –20C to +60C (–4 F to +140 F) |
| Mass | Approx. 680 g (1 lb 8.0 oz) |
| External dimensions | 201mm (8 in) x 255mm (10 1/8 in) x 60mm (2 3/8 in) 89mm (3 5/8 in) |
| 3.5-inch colour TFT transflective LCD Image display area dimensions | 76.8 × 43.2 mm (31/8 × 13/4 inches) (H/V, 16:9 aspect ratio) |
| Performance | |
| Brightness | 200 cd/m2 (typical) (when eyepiece is attached) |
| Resolution | 500 lines or more |
| Colour temperature | 6500 K (typical) |
| Connector | |
| Connector | Rectangular 26-pin connector |
| Supplied accessories | |
| Supplied accessories | Operation manual (1) |
| Optional accessories | |
| Optional accessories | Viewfinder Rotation Assembly : BKW-401 |
| Compatible products | |
| Compatible products | PXW-X500, PMW-500, HXC-D70 – Please note to attach the viewfinder to the PMW-500, the firmware version on the camcorder must be 1.10 or later. To attach the viewfinder to the HXC-D70, the firmware version on the camera must be 1.21 or later. |
Notes: Design and specifications are subject to change without notice.
Reviews
There are no reviews yet.