High performance three 2/3-inch 4K CMOS sensor portable system camera with direct 4K output
Tổng quan
A new benchmark in creative flexibility
- The HDC-5500 system camera brings new levels of image quality, portability and creative flexibility to live production environments. Enjoy premium 4K/HD/HDR picture quality – and anticipate tomorrow’s production needs while maintaining full compatibility with today’s workflows and system hardware.
Direct 4K output
- A newly-developed on-board signal processor allows the HDC-5500 to output 4K signals directly without the addition of a dedicated external baseband processor unit, saving rack space in the confines of an OB vehicle or studio environment. It can also output 4K signals directly via 12G-SDI. Thanks to an all-new 4K baseband transmission system, the compact camera is ideal for use in steadicam and wireless camera systems
Impressive sensitivity and colour reproduction
- Capture premium pictures with Sony’s advanced 2/3-inch 4K CMOS sensor with global shutter technology that eliminates the ‘jello effect’ and banding noise. This allows the HDC-5500 to capture pristine 4K images with exceptionally low noise (-62dB), impressive sensitivity (F10 at 1080/59.94p or F11 at 1080/50p) and high dynamic range, while achieving the ITU-R BT.2020 broadcast standard wide colour space. It’s teamed with a specially developed LSI Digital Signal Processor that fully realises the extraordinary imaging power of this new sensor.
Get the look
- Broaden your creative possibilities and achieve exactly the look you want in any shooting situation. Low-key Saturation ensures rich, vibrant colours in low-light areas. Powerful gamma functions give absolute control over fine-tuning tonal values, contrast and detail.
Simultaneous HDR and SDR production
- The HDC-5500 can capture High Dynamic Range images, supporting Sony’s SR Live workflow for simultaneous HDR/SDR production with reduced inventory requirements.
This product contains pre-installed software and requires the purchase of licence keys to activate some functions.
Tính năng sản phẩm
- Easy transmission change
- ARIA: Automatic Restoration of Illumination Attenuation
- Wider workflow options
- Display camera number and tally
- The go anywhere camera
- Rich focus assist functions
- Seamless integration
- Servo controlled ND and CC filters
- Multi-speed slo-motion acquisition
- Network TRUNK
- Recording and real-time network transfer
Thông số kỹ thuật
General
- Power requirements: AC 240 V, 1.4 A (max.), DC 12 V, 9.5 A (max.), DC 240 V, 1.05 A (max.)
- Operating temperature: –20°C to +45°C (–4°F to 113°F)
- Storage temperature: –20°C to +60°C (–4°F to 140°F)
- Mass: Approx. 5.0 kg (11 lb 0.4 oz) (Unit only)
Imager
- Imager: 2/3-inch type CMOS sensor with global shutter
- Method: 3-CMOS, RGB
- Effective resolution (H x V): QFHD: 3840 × 2160; HD: 1920 × 1080
Electrical characteristics
- Sensitivity: F10 with 1080/59.94p; F11 with 1080/50p (at 2,000 lx with 89.9% reflectance)
- Signal-to-noise ratio: -62 dB
- Geometric distortion: Negligible (not including lens distortion)
Optical system specifications
- Spectrum system: F1.4 prism
- Built-in filters: ND filters 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND; CC filters A: Cross filter, B: 3200K (clear), C: 4300K, D: 6300K
Input /output connectors
- CCU: Optical / electrical multi connector (LEMO 3K.93C connector) (x1)
- LENS: 12-pin (x1)
- VF: 20-pin (x1)
- MIC 1 IN: XLR 3-pin, female (x1)
- AUDIO IN CH1, CH2: XLR 3-pin, female (x1 each); When AUDIO switch is set to MIC: –60 dBu (can be selected up to –20 dBu by menu operation), balanced; When AUDIO switch is set to LINE: 0 dBu, balanced
- INTERCOM 1: XLR 5-pin, female (x1)
- INTERCOM 2: XLR 5-pin, female (x1)
- EARPHONE: 4-pole mini jack (x1), (3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
- DC IN XLR 4-pin (x1), DC 10.5 to 17 V: XLR 4-pin (x1), DC 10.5 to 17 V
- DC OUT: 4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹; 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
- SDI 1: BNC (x1)
- SDI 2: BNC (x1)
- SDI 3: BNC (x1)
- SDI MONI: BNC (x1)
- TEST OUT: BNC (x1)
- PROMPTER / GENLOCK: BNC (x1); PROMPTER 1 Vp-p, 75 Ω; GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
- PROMPTER2: No
- RET CTRL: 6-pin (x1)
- REMOTE: 8-pin (x1)
- TRACKER: 12-pin (x1)
- CRANE: 12-pin (x1)
- USB: USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
- NETWORK TRUNK: RJ-45 type 8-pin (x1)
Supplied accessories
- Before Using This Unit (1)
- Operating Instructions (CD-ROM) (1)
- Cable clamp belt (1 set)
- Screws (+B3×8) (2)
- Attached label (1)
Reviews
There are no reviews yet.