AJA FS2 2-channel HD/SD Frame Synchronizer/Converter

• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
• (HD) 1920 x 1080i 25, 29.97, 30
• (HD) 1280 x 720p 50, 59.94, 60
• (SD) 625i 50
• (SD) 525i 59.94

Notes:

• In the case of 1080PsF 23.98 input – and when 1080i 59.94 (or 525i) is selected as an output format, the FS2 automatically does 3:2 pulldown to get the correct frame rate. Similarly, in the case of 1080pSF/24 input, FS2 automatically does 3:2 pulldown to get the correct frame rate.
• When passing 24 or 60 frame rate video, output is high definition.

• Dual 3G-SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector module
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1x BNC each)
• HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/6060

• HD component YPbPr, SMPTE-274 (3x BNC)
• 12-bit A/D, 2x oversampling
• SD Component (3x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit A/D, 4 x oversampling
• +/- .25 dB to 5.5 MHz Y frequency response
• +/- .25 dB to 2.5 MHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit A/D, 4x oversampling

• Dual SD/HD/3G SDI, SMPTE-259/292/424, 8 or 10-bits
• Dual Fiber 3G-SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector modules
• Single Channel LC connector module
• Single Channel SC connector module
• Single Link 4:2:2 (1x BNC each)
• HDMI v1.3 30-bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60

• HD component YPbPr, SMPTE-274 (3x BNC)
• 12-bit D/A, 2x oversampling
• SD Component (3x BNC)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J
• 12-bit D/A, 4x oversampling
• +/- .25 dB to 5.5 mHz Y frequency response
• +/- .25 dB to 2.5 mHz C frequency response
• .5% 2T pulse response
• <2 ns Y/C delay inequity
• SD Composite
• 12-bit D/A, 4x oversampling

• 16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (8x XLR via 25-pin breakout cable)

• 8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8x XLR via 25-pin breakout cable)
• +12 dBu, +15 dBu, +18 dBu, +24 dBu (Full Scale Digital)
• +/- 0.2 dB 20 to 20 kHz frequency response

• 16-Channel, 24-bit SMPTE-272/299 SDI embedded audio, 48 kHz sample rate, synchronous
• 16-Channel, 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (8x XLR via 25-pin breakout cable)

• 8-Channel, 24-bit A/D analog audio, 48 kHz sample rate, balanced (8x XLR via 25-pin breakout cable)
• +12 dBu, +15 dBu, +18 dBu, +24 dBu (Full Scale Digital)
• +/- 0.2 dB 20 to 20 kHz frequency response

• Hardware: 10-bit
• Anamorphic: fullscreen
• Pillarbox 4:3: results in a 4:3 image in center of screen with black sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
• Zoom Letterbox: results in image zoomed to fill fullscreen
• Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change

• Hardware: 10-bit
• Anamorphic: fullscreen
• Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
• Crop: image is cropped to fit new screen size

• Hardware 10-bit
• 1080i to 720p
• 720p to 1080i
• 720p to 1080PsF

• Letterbox: This transforms SD anamorphic material to a letterboxed image
• H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image

• SDI RP188 via SDI BNC

• External, 2x BNC
• Looping, nonterminating
• Blackburst or tri-level sync

• 10/100 Ethernet (RJ-45)
• Embedded web server for remote control
• VTECS™ protocol for Remote Control Panel

• Alphanumeric display, with dedicated buttons/knobs

• GPI in/out, 15-pin D-connector
  • Pinout is as follows:

• 17.25″ x 14.5″ x 1.75″ 1RU (438.15 x 368.3 x 44.45 mm)

• 7.9 lb (3.6 kg)

• 100-240 VAC 50/60 Hz, (Dual, redundant power supplies), 55W typical; 80W max.

• Safe Operating Temperature: 0 to 40 C (32 to 104 F)
• Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
• Operating Relative Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)